Bursting Strength Tester TZ-PBT100 offers a measurement range from 50 to 1600 kPa, allowing effective testing for various materials. It has a transmit hydraulic speed of 95 ml per minute increasing consistent and controlled rate for accurate results. Our tester applies pressure on the material for a total duration of 5 seconds maintaining the uniform pressure. It is integrated with LCD display facilitating easy operation and data visualization.
| Measuring Range | 50 to 1600 kPa |
|---|---|
| Test Method | Mullen Test Method |
| Pressure Between Platens | > 430 kPa |
| Transmit Hydraulic Speed | 95 ± 5 ml/min |
| Diaphragm Resistance | Protruding 9mm: (20 to 40) mm |
| Continuous Testing Time | 5 s |
| Resolution | 1 kPa |
| Accuracy | ± 0.5% F.S |
| Hydraulic System Tightness | On the measurement limit, one minute drop < 10% Pmax |
| Upper Platen Aperture Diameter | (30.5 ± 0.05) mm |
| Lower Platen Aperture Diameter | (33.5 ± 0.05) mm |
| Power Consumption | 90 W |
| Dimensions (L × W × H) | 440 × 370 × 520 mm |
| Weight | 55 kg |
• Built-in printer
• Quick reset to start position
• Robust and highly accurate
• Ergonomic design
• Tests different corrugated materials
Bursting Strength Tester measures the burst strength of materials, including various types of paper, thin cardboard, single and multi-layer cardboard, corrugated cardboard, and non-paper products such as silk cotton.
